Model applicable	Type of guide bush
SB-16	S13, R16, P10, P16 type
SA-16R	R16 type
SB-20R	VNC20, R20 type
ECAS12	R16 type
SV-12	R16 type
SV-20	VNC20, R20 type
SV-32/32JIII	MR32 type

Guide Bush Unit

An innovative and advanced Guide bush system developed by Star that has realized trouble-free operation with unprecedented speed and precision.

In former times, operators had difficulty managing the variations in bar diameters. The revolutionary system provides a system that is pneumatically controlled to grip both ground or drawn bar stock within a 30 micron tolerance.

• No longer is it necessary to adjust guide bushes or for the control to overcome the problem.
• No longer is it necessary to constantly measure bars and adjust accordingly.
• The rotary magic guide bush is at all times controlled by constant air pressure.
• The clearance between the guide bush and the material is always at zero.
• The guide bush system automatically adjusts to suit the material size.

Neither control administration of material diameter nor G.B adjustment needed

Just until now

• For small diameter material in particular, it was necessary to make selection by measuring diameters of material by micrometer beforehand.
• It was also necessary to make adjustment of guide bushing at each time of introducing a different batch of material.
• From now on

Guide bushing is all the times fastened tight by constant air pressure.

• The clearance between guide bushing and material is always kept nil, even when material diameter changes.
• Drawn material, if diameter dispersion is within 0.03mm, can be used.

Setting method

• Turn the air pressure OFF and tighten the adjusting nut to such an extent that the material can be moved in and out lightly by hand.
• Next, turn the air pressure ON and adjust the pressure while putting in and out the material by hand. Setting is thus completed. It is as simple as that.